Memory Modules; Installing And Removing A Memory Module - Siemens SIMATIC IPC PX-39A Operating Instructions Manual

Expanding and assigning parameters to the device

6.5 Memory modules

6.5 Memory modules
6.5.1

Installing and removing a memory module

The motherboard is equipped with one slot for an SO-DIMM DDR4 memory module. You can
use it to expand the memory capacity of the device to a maximum of 32 GB.
Usable memory modules
• DIMM DDR4 memory modules
• Memory transaction rate 3200 MT/sec "unbuffered"
• "without ECC" or "with ECC"
Note
Use only the memory modules recommended by Siemens AG.
Requirement
• The device is open, see important information under "Opening the device (Page 61)".
Procedure - Removal
1. Push down the module clips
towards the outside.
The memory module tilts for-
ward.
Note: The left holder is lo-
cated under the cover (not im-
mediately visible from above)
2. Remove the memory module
from the slot.
72
Operating Instructions, 08/2022, A5E51699601-AA
SIMATIC IPC PX-39A