Table of Contents
Advertisement
Commissioning the device
4.3 Switching off the device
Procedure
1. Press the on/off button.
The green POWER LED lights up. The module carries out a self-test.
2. Follow the instructions on the screen.
Press <ESC> or <DELETE> to enter setup.
3. Make the region and language settings.
If you want your system language to be international, select English. You can also
change the region and language settings at a later point in time.
Note
Once the operating system has been set up, the device may restart.
Result
The interface of the operating system is displayed every time you turn on the device and
after the startup routine.
4.3
Switching off the device
Shutting down the operating system
For Windows operating systems:
● Select "Start" > Shut down"
or
● Briefly press the on/off button (unless otherwise configured in the power options).
Information on the position of the button is available in the section "Operator controls
(Page 15)".
For non-Windows operating systems:
● Briefly press the on/off button.
The operating system is shut down. The "POWER" LED goes out. The device is switched off
but not fully disconnected from the mains voltage.
38
Operating Instructions, 09/2018, A5E41134132-AE
SIMATIC IPC347E
Advertisement
Table of Contents
