Device Identification Data - Siemens SIMATIC IPC347E Operating Instructions Manual

Table of Contents

Advertisement

Installing and connecting the device
3.1 Preparing for installation
6. If the contents of the packaging are incomplete, damaged or do not match with your
order, inform our service department or the sales representative who deliver you the
product immediately.
7. Keep the enclosed documentation in a safe place. You need the documentation when
you commission the device for the first time or meet other problems in the later work.
8. Record the identification data of the device.
3.1.2

Device identification data

The device can be clearly identified with the help of this identification data in case of repairs
or loss.
The following illustrations are examples. The data of your device may differ from the data in
these examples.
Rating plate
The rating plate is located on the inside of the front door for the SIMATIC IPC347E.
26
WARNING
Electric shock and fire hazard due to damaged device
A damaged device can be under hazardous voltage and trigger a fire in the machine or
the plant. A damaged device has unpredictable properties and states.
Death or serious injury could occur.
Make sure that the damaged device is not inadvertently installed and put into operation.
NOTICE
Damage from condensation
If the device is subjected to low temperatures or extreme fluctuations in temperature
during the transportation, for example in cold weather, moisture could condensed on or
inside the device.
Moisture can result in short-circuits and damage the device.
In order to prevent damage to the device, observe the following rules:
If a condensation happens, wait approximately 12 hours or until the device is completely
dry before switching it on.
Operating Instructions, 09/2018, A5E41134132-AE
SIMATIC IPC347E

Advertisement

Table of Contents
loading

Table of Contents