Turning Off, Turning On, And Resetting The Display - SMART Board 6075S Installation And Maintenance Manual

Chapter 4
Maintaining the display
Turning off, turning on, and resetting the display
Cleaning and maintaining hardware
Checking the display installation
Cleaning the screen
Cleaning the touch sensors
Maintaining ventilation
Preventing condensation
Replacing the pens and erasers
Removing and transporting the display
Updating system software
Applying an automatic system software update manually
Updating system software manually
With proper maintenance, the display will provide years of use.

Turning off, turning on, and resetting the display

In most situations, you can put the display to sleep when not using it following the instructions in the
SMART Board 6000S and 6000S Pro series interactive displays user guide (smarttech.com/kb/171415).
In some situations, such as when you transport the display or clean its screen, you need to turn the display
off. You can turn it back on after.
You can also reset the display.
To turn the display off
1. Press the Power button
A slider appears on the screen.
2. Move the slider to the right.
smarttech.com/kb/171414
on the convenience panel or the remote control for five seconds.
44
45
45
45
46
46
47
47
47
48
48
49
44