Turning The Display Off And Back On; Resetting The Display - SMART Board 6000 series Installation And Maintenance Manual

CHAPTER 7
MAINTAINING THE DISPLAY
NOTE
For information on updating the iQ appliance software, see Updating system software on
page 35.
To update firmware
See SMART Board 6000 series

Turning the display off and back on

In some situations, you need to turn off the display for a period of time. You can turn it back on
after.
To turn the display off
1. Press the Standby button
2. Flick the switch beside the AC power inlet to the OFF (O) position.
NOTE
Wait at least 30 seconds before turning the display back on.
To turn the display back on
Flick the switch beside the AC power inlet to the ON (I) position.

Resetting the display

You can reset the display and the iQ appliance using the front control panel.
To reset the display
1. Press the Standby button
A message appears on the screen, prompting you to either press the button again to enter
Standby mode or press and hold the button to reset the display.
2. Press and hold the Standby button
The display and iQ appliance reset.
49 smarttech.com/kb/171167
firmware.
on the front control panel twice.
on the front control panel.
until the screen turns black.