CHAPTER 5
MAINTAINING THE DISPLAY
To turn the display back on
Press the Power button
Resetting the display
You can reset the display and the iQ appliance using the convenience panel.
To reset the display
Press and hold the Power button
The display and iQ appliance reset.
Removing and transporting the display
If the display is wall mounted, you might need to remove it from its current location and transport it
to another location on occasion.
To remove the display safely, use two or more trained installers.
WARNING
Do not attempt to move the display by yourself. The display is very heavy.
l
Do not move the display by connecting a rope or wire to the handles on the back. The
l
display can fall and cause injury and product damage.
IMPORTANT
Follow any documentation included with the third-party mounting hardware.
To remove the display
1. Turn off any connected computers.
2. Turn off the display (see Turning the display off and back on on the previous page).
3. Flick the switch beside the AC power inlet to the OFF (O) position.
4. Remove all accessible cables and connectors.
5. Remove the iQ appliance from the accessory slot.
38
smarttech.com/kb/171164
on the convenience panel.
on the convenience panel for 10 seconds.