Gwn76Xx Access Point Configuration; Figure 7: Gwn7600 Offline Status; Figure 8: Edit Button On Gwn76Xx - Grandstream Networks GWN7000 Management & Provisioning

For gwn76 series wireless ap

Hide thumbs Also See for GWN7000:

Table of Contents

•

When the access point is not reaching the GWN7000, it will appear as Offline.

•

To unpair an access point, click on unpair button

Note:

If the GWN76xx is not being paired, or the pair icon is grey color, make sure that it's not being paired with

another GWN7000 Router or GWN76xx Access Point acting as Master Controller, if yes users will need to

unpair it first, or reset it to factory default settings to make it available for pairing.

GWN76xx Access Point Configuration

The GWN76xx access point can be easily managed and configured from the GWN7000 Web GUI. The

GWN7000 acts as controller for all paired GWN76xx access points.

To configure the paired GWN76xx access point, please refer to following steps:

1. Access the GWN7000 Web GUI using the administrator username and password. (Default

username / password are: admin/admin)

2. Navigate to Access Points page which list and display available / paired GWN76xx access points.

3. Select the desired access point and click on Edit

Device Configuration which combine the status, users and configuration settings of the GWN76xx

access point.

GWN7000 Controller

GWN76xx Wireless AP Management & Provisioning

button under Actions to access GWN76xx

P a g e

Table of Contents