2.
Click on
appear.
3. Click on Pair
4. The paired GWN76xx will appear Online, Click on
5. Click on
connected to it and configuration, or select multiple GWN76xx APs from the same model, and click on
to apply same configuration on selected units.
Refer to below table for Device Configuration tabs.
Status
Users
Configuration
to discover access points within GWN7000's Network, the following page will
Figure 13: Discovered Devices
under Actions, to pair the discovered Access Point with the GWN7000.
Figure 14: GWN7610 online
next to paired access point to check device configuration for its status, users
Table 16: Device Configuration
Shows the device's status information such as Firmware version, IP
Address, Link Speed, Uptime, and Users count via different Radio
channels.
Shows the users connected to the GWN76xx access point.
•
Device Name: Set GWN76xx's name to identify it along with its
MAC address.
GWN7000 User Manual
to unpair it.
P a g e
|
33