Ranger Laser-Spot LS43B Installation And Operation Manual page 14

The following drawing shows the components on the back of the Balancer.
not
Not necessarily to scale. Not all components shown. The three Connectors are the same. Each
cable fitting connects to one, and only one, of the three Connectors. Do not force a cable fitting into a
Connector; you could damage the Connector and/or the cable fitting.
Display Panel Mount Bar Base Plate
The has a at the bottom (where it connects to the back of
Mount Plate
the Balancer) and a at the top (where it connects to the Display).
14
LS43B Laser-Spot™ Wheel Balancer P/N 5900086 — Rev. A1 — 12/212018