Common Setting - Mitsubishi MELSEC Q series User Manual

8.5

Common Setting

Initial settings for using the data logging function are configured. Clicking "Common Setting" on the edit item tree will
display the area for the common setting.
Common setting consists of the following settings.
Item
Auto Logging Setting
Buffer Capacity Setting
Description
Configure the settings that are required for the auto logging function.
A buffer size used for data logging is assigned to each setting number.
CHAPTER 8 HOW TO USE THE CONFIGURATION TOOL
Reference
Page 134, Section 8.5.1
Page 135, Section 8.5.2
133
8