Mitsubishi MELSEC Q series User Manual page 128

(2) Setting items
Item
Output date
Date
column
Output
trigger
Trigger
information
information
*1
column
Index Output index column
Data
sampling Output data sampling interval column
interval
Execution
program Output execution program name
name
Execution
Output execution step No. column
step No.
Output
Target memory
Device device
comment comments
output for data
Target comment file name
column
Output comments
Comment
*5
Comment
*1 This setting is enabled only when "Trigger logging" is selected for Logging type.
*2 If the timing of sampling coincides with a system operation (such as a system interrupt), "*SYSTEM" is output.
*3 If the timing of sampling coincides with a system operation (such as a system interrupt), "0" is output.
*4 If any of "year", "month", "day", "hour", "minute", and "second" is missing, when the data logging file is opened by GX
LogViewer, index data will be displayed instead of time data.
GX LogViewer Version 1 Operating Manual
*5 The following characters cannot be entered. ( Page 158, Section 8.14.3)
• The input character is not supported as a character code of OS language.
• The language of the character code differs from that of the characters that have been entered to the data logging
setting window.
*6 The "Data line output format" field can be set using the following format:
• Year: "YYYY" for four-digit notation and "YY" for two-digit notation
• Month: MM
• Day: DD
• Hour: hh
• Minute: mm
• Second: ss
• Millisecond: ms (3-digit notation or s, ss to ssssss, or sssssss (up to seven digits after the decimal point)
(Example) YY/MM/DD hh:mm:ss.sss  10/10/13 09:44:35.241
126
The "Date Line Output Format" window is displayed. Set the
data line output format.
button
For available characters, refer to  Page 157, Section 8.14.
The "String for Indicating Trigger Occurrence" window
appears. Set a character string that is appended to the data
*5
button
line and indicates occurrence of a trigger.
For available characters, refer to  Page 157, Section 8.14.
Index numbers are output to files.
Information in the data sampling interval column is output to
files.
Information in the execution program name column is output to
*2
files.
Information in the execution step No. column is output to
*3
files.
Specify a memory where comment files used for comment
display are stored.
Specify the comment file used for comment display.
Comment lines are output to CSV files.
The comment is output at the beginning of the CSV file.
Description
*4*6
Setting range
Up to 27 one-byte
characters
32 one-byte or 16 two-
byte characters or less




• Program Memory
• Standard ROM
• SD memory card
Eight alphanumeric
characters or less

256 two-byte
characters or less (no
line feed)