Mitsubishi MELSEC Q series User Manual page 199

Print date *Manual number
February 2013 SH(NA)-080893ENG-K
October 2013 SH(NA)-080893ENG-L
June 2014 SH(NA)-080893ENG-M The manual was fully revised because of the following reasons.
October 2014 SH(NA)-080893ENG-N
March 2015 SH(NA)-080893ENG-O
June 2015 SH(NA)-080893ENG-P
December 2015 SH(NA)-080893ENG-Q
May 2016 SH(NA)-080893ENG-R
October 2016 SH(NA)-080893ENG-S
New models of the Universal model QCPU and the LCPU have been
added.New models of the LCPU have been added.
Added models
Q03UDVCPU, Q04UDVCPU, Q06UDVCPU, Q13UDVCPU, Q26UDVCPU,
L06CPU, L26CPU
New models of the LCPU have been added.
Added models
L06CPU-P, L26CPU-P
Partial correction
INTRODUCTION, TERMS, Section 3.1, 3.3.2, 5.1, 6.2, 6.3.3, 6.4, 6.8, 7.4.6,
8.2.5, 8.3.4, 8.4.1, 8.4.4, 8.4.10, 8.4.11, 10.1.1, 10.1.2, 10.3, 10.4, 13.1,
13.2.2, Appendix 2
Additions
Section 7.4.7, 7.4.8
• The name of configuration tool was changed from QnUDVCPU & LCPU
Logging Configuration Tool to CPU Module Logging Configuration Tool.
• The contents of the Operating Environment for the QnUDVCPU & LCPU
Logging Configuration Tool Version 1 (English Version) (BCN-P5882) were
integrated into the CPU Module Logging Configuration Tool/GX LogViewer
Installation Instructions (BCN-P5999-0393).
Partial correction
Section 6.8, 8.5.2, 13.1
Added models
NZ1MEM-2GBSD, NZ1MEM-4GBSD, NZ1MEM-8GBSD, NZ1MEM-16GBSD
Partial correction
RELEVANT MANUALS, TERMS, Section 1.1, 2.1, 3.3.2, 5.1, Chapter 6,
Section 9.1, 10.1.1, 10.1.2, 10.3, 10.4
Additions
Section 6.8
Partial correction
Section 2.3, 5.2, 5.4, 8.2.2, 8.4.6, Appendix 2
Partial correction
Section 12.1, 13.1
Partial correction
TERMS, Section 8.4.5, 9.1, Appendix 2
Partial correction
Section 5.4, 8.3.4, 8.3.5, 8.4.4, 8.4.7, 8.4.9, 8.4.11
Revision
197