Writing The Data Logging Setting To The Sd Memory Card - Mitsubishi MELSEC Q series User Manual

8.3.6

Writing the data logging setting to the SD memory card

Write the currently editing data in a form available for CPU module operation. Data are written directly to the SD
memory card in the personal computer. When the SD memory card is installed into the CPU module, logging is started.
(1) Operating procedure
1.
Install the SD memory card in the personal computer.
2.
Open the "Write Logging Setting into Memory Card(SD)" window.
[Project]  [Write Logging Setting into Memory Card(SD)]
3.
Select a drive to write into.
4.
Select a setting item to write.
5.
Click the
If some data currently exist in the SD memory card before writing, the common settings and the setting data with the same
setting No. will be overwritten. Data other than the above will be held in the SD memory card. Because of this, the data to be
written may not match the data written.
108
button.