Batch Data Insertion - Mitsubishi MELSEC Q series User Manual

8.4.7

Batch data insertion

In the data list, a block of data can be inserted all at once. Data are entered in order from the highest numbered blank
line on the "Data" setting window. (If there is a line where data has already been set, the line will be skipped.)
(1) Operating procedure
In the right-click menu on the "Data" setting window, select "Batch Data Insertion".
(2) Setting window
(3) Setting items
Item
Head Specify the head device number.
Device
Last The last device number calculated from the data type and size is displayed.
Data type Select a data type of the target data.
Size Specify the size when the data type is "String" or "Raw".
Clicking the
Output Format
(integer/float)" window. Select the type of the format for data output to files.
Total
Specify the total number of data to be entered all at once.
number
Continuous
setting
Interval Specify the interval of the data to be entered all at once.
120
Description
button on the right of "Output Format" displays the "Output format
Setting range


• Bit
• Word [signed]
• Double word [signed]
• Word [unsigned]
• Double word [unsigned]
• Float [single precision]
• Float [double precision]
• String
• Raw
1 to 256 bytes
• Decimal format
• Hexadecimal format
• Exponential format (Number of
digits: 0 to 14)
2 to 128 points
• QnUDVCPU, QnUDPVCPU: 1 to
4910079 points
• LCPU: 1 to 421887 points