Stack Logging File Transfer - Mitsubishi MELSEC Q series User Manual

7.4.7

Stack logging file transfer

Remark
Check the versions of the CPU module and configuration tool used when using this function with the LCPU. ( Page 190,
Appendix 2)
This function cannot be used with the High-speed Universal model QCPU and Universal model Process CPU.
Transfer the untransferred data logging file when switching file due to the network failure by using data logging file
transfer function to the FIP server. The data logging file made during network failure can be transferred when the
network recovered because the order of file transfer is decided.
data logging function
<Stored files>
00000001.CSV (transferred file)
00000002.CSV (transferred file)
00000003.CSV (transferred file)
00000004.CSV (transferred file)
00000005.CSV (transferred file)
00000006.CSV (untransferred file)
00000007.CSV (untransferred file)
00000008.CSV (untransferred file)
data logging function
<Stored files>
00000001.CSV (transferred file)
00000002.CSV (transferred file)
00000003.CSV (transferred file)
00000004.CSV (transferred file)
00000005.CSV (transferred file)
00000006.CSV
00000007.CSV
untransferred file
00000008.CSV
92
Execution of the
Ethernet
disconnected
Data logging files that have
not been transferred to the
FTP server due to the network
disconnection.
Execution of the
Ethernet
Hub
Network
Hub
Network
recovered
The untransferred
files can be transferred
to the FTP server
when the network
recovered.
FTP server
<Stored files>
00000001.CSV
00000002.CSV
00000003.CSV
00000004.CSV
00000005.CSV
FTP server
<Stored files>
00000001.CSV
00000002.CSV
00000003.CSV
00000004.CSV
00000005.CSV
00000006.CSV
00000007.CSV
00000008.CSV