Mitsubishi MELSEC Q series User Manual page 141

(3) Setting items and buttons
Item
PC side I/F
PLC side I/F
No Specification
Other Station (Single
Other Station
Network)
Setting
Other Station (Co-
existence Network)
Network Communication Route
button
button
button
button
CHAPTER 8 HOW TO USE THE CONFIGURATION TOOL
Description
Set the interface of the personal computer.
Set the interface on the CPU module side.
Select this when accessing the LCPU that is directly connected to the
personal computer.
Select this when accessing a CPU module on another station via a
single network (including a multi-layer system).
Select this when connecting a personal computer and a Q series CPU
module and accessing from the CPU module to another CPU module
on another station via CC-Link or a serial communication module.
For an access to another station via a network, select a network type,
and specify the network No. and station No. and head I/O. The settings
differ depending on the network type.
Displays a list of routes. Since a route selected from the list is
automatically set in the "Transfer Setup" window, the setting is easy
even in the case of a complex system.
Enables the setting for directly connecting the CPU module and a
personal computer.
Checks if an access to the CPU module specified in the "Transfer
Setup" window is possible or not. If the access is made properly, the
model name of the accessed CPU module is displayed in the "PLC
Type" box.
Displays a graphical image of the configured route.
Reference






Page 140, Section 8.6.4
Page 136, Section 8.6.1
Page 140, Section 8.6.3

8
139