Mitsubishi MELSEC Q series User Manual page 37

Item
Data logging operation at transition to RUN
Auto logging by inserting an SD memory card
Others
File access
Data logging file transfer function
*1 Before using the data logging file transfer function with the LCPU, check the versions of the CPU module and
configuration tool used. ( Page 190, Appendix 2)
*2 The setting is available only for the High-speed Universal model QCPU and the Universal model Process CPU.
For additional information, refer to  Page 127, Section 8.4.12.
*3
*4 The function is available only for the High-speed Universal model QCPU and the Universal model Process CPU. Before
using this function, check the versions of the CPU module and configuration tool used. ( Page 190, Appendix 2)
Specify the operation at the time of status change, from
power on to RUN, from reset to RUN, or from STOP to
RUN, after registration of the data logging setting.
By inserting an SD memory card (to which data logging
settings have been written), data logging automatically
starts.
The FTP server function allows saving and deletion of
data logging files from the SD memory card installed in
the CPU module to the personal computer.
Data logging files can be transferred from the CPU
*1
module to the FTP server on LAN.
CHAPTER 3 SPECIFICATIONS
Specifications Reference
Page 77, Section 7.1
Page 78, Section 7.2
Page 81, Section 7.3
3
Page 82, Section 7.4
35