Data Logging File Name Addition (Sp.logfiles) - Mitsubishi MELSEC Q series User Manual

11.3

Data Logging File Name Addition (SP.LOGFILES)

*1
SP.LOGFILES
S: Character string (8 characters maximum) added to the data logging file name or start number of the device in which a character string is
Setting data
n
S
*1 The instruction is available only for the High-speed Universal model QCPU and the Universal model Process CPU.
Before using the instruction, check the version of the CPU module. ( Page 190, Appendix 2)
(1) Function
• Character string S enclosed with double quotation marks (" ") or a character string from a device number to
a device number in which 00
data logging file name subsequently created with data logging setting No.n.
...
b15
(S) 42 (B)
H
(S)+1 00 (NULL)
H
• The length of the character string S is 1 to 8 characters in ASCII characters (no two-byte characters). If the
character string is valid, the bit corresponding to the setting No. of SD710 (String addition to data logging file
name) is turned on. (The character string that was set when the first stack file was created is added to the
data logging file name.) When 0 characters (null character) are specified, specification by the instruction is
disabled, and the bit corresponding to the target setting No. is turned off. (The data logging file name returns
to the status before an additional character string becomes valid (a file name specified in the configuration
tool).)
Command
Internal device
R, ZR
Bit Word
  
  
(null code) is stored and an underscore (_) are added to the beginning of the
H
...
b8 b7 b0
41 (A)
H
43 (C)
H
This indicates the end of The SP.LOGFILES
a character string. instruction is executed.
CHAPTER 11 DATA LOGGING INSTRUCTIONS
SP.LOGFILES
J\
U\G
Bit Word


<Data logging file name>
ABC_00000001.CSV
n S
n: Data logging setting No. (BIN 16-bit)
stored (character string)
Constant
Zn Others
K, H E, $
  
  
175
11

