Mitsubishi MELSEC Q series User Manual page 132

The data logging file transfer function cannot be used while the auto logging function is enabled. Check that the auto logging
function is disabled in advance.
(3) FTP setting
Set a transfer destination server.
(a) Setting window
(b) Setting items
Item
FTP Server Name
Login User Name
Login Password
Confirm Login Password
Directory Path
Data Transfer Mode
button
*1 For file transfer test, "FTP Server Connection Request Timeout Time" is fixed to 10 seconds.
130
Description
Set the IP address of the transfer destination FTP server (decimal).
Set an FTP server account (user name).
Set a login password for the FTP server.
Set a directory path on the transfer destination.
( Page 84, Section 7.4.2)
Specify a data transfer mode of the FTP server. Set "PORT Mode
(Normal)" usually. Due to a Windows firewall or other problems, if
"PORT Mode (Normal)" cannot be set for communications between
the CPU module and the FTP server, specify "PASV Mode".
Whether the CPU module and the transfer destination server are
normally connected or not is tested.
*1
Setting range
0.0.0.1 to 223.255.255.254
1 to 32 ASCII characters (alphanumeric
characters and special characters
A double quotation mark ("), comma (,), colon
(:), and semicolon (;) cannot be used.
0 (blank) to 32 ASCII characters
(alphanumeric characters and special
*1
characters )
1 to 64 ASCII characters
(alphanumeric characters and special
*1
characters )
A double quotation mark ("), asterisk (*),
comma (,), period (.), colon (:), semicolon (;),
angle brackets (< >), question mark (?), and
broken vertical bar (|) cannot be used.
• PORT Mode (Normal)
• PASV Mode

*1
)