Copying Files To A Pc - wtw photoLab 6100 VIS Operating Manual

®
photoLab 6100 VIS
ba75847d06 06/2013

4.12.3 Copying files to a PC

You can copy from the photometer to a PC the following data:
 Measurement data
 Spectra
 Kinetic recordings
 AQA records
 User-defined methods
 Profiles
After saving measurement data in *.csv or *.pdf format, you can copy them to
a PC. Measurement data in csv format can be directly imported to and pro-
cessed in spreadsheets such as Microsoft
Note
Depending on the country variant, some spreadsheet programs require a cer-
tain decimal separator for the correct import of numerical values (comma or
point). The decimal separator can be selected in the following menu:
<HOME> -> General setup -> Data transfer/Printer -> Decimal separator for
csv-Files.
Files containing measurement data can be copied to a PC in the following
ways:
 By using a USB memory device as a temporary storage (see section and
section 4.12.1). Subsequently, you can connect the USB memory device
to a PC and read out the data.
 By means of the "SpectralTransfer" program
(see operating manual of the "SpectralTransfer" program).
The "SpectralTransfer" program and the corresponding operating manual
is provided on the enclosed CD-ROM.
 Using the "pHotoLab Data spectral" program
(see operating manual of the "pHotoLab Data spectral" program).
The "pHotoLab Data spectral" program is available as an accessory.
 
Excel .
Operation
133