Loading A Profile For Kinetics Recording - wtw photoLab 6100 VIS Operating Manual

®
photoLab 6100 VIS
Narrowing down the
list of profiles
Search function
ba75847d06 06/2013

4.9.2 Loading a profile for Kinetics recording

To load a profile for Kinetics recording, proceed as follows:
<HOME>
Kinetics
– [Profile list]
Select profile (all)
4001 NADH Absorbance
4002 ADH Absorbance
Last used
If the list is very long, you can narrow down the profile list and thus make the
search easier as follows:
 Using [Last used], you can restrict the profile list to the ten profiles last
used.
 With the search function you can search certain character strings in the
list. The search takes place as a full-text search of the entire list contents.
Thus you can search for a profile number or name.
Select profile (last used)
NA_
4001 NADH Absorbance
All profiles
Note
Note the case sensitivity when searching.
The list of profiles is displayed.
16.04.07 9:52
The profiles are ordered according
to the profile number.
Selecting a profile:
1 Select the required profile with
<▲><▼>. The active selection is
displayed in reverse video.
2 Accept the selection with
<START·ENTER>.
The photometer is ready to mea-
sure.
Search for a character string:
16.04.07 9:52
Enter the character string to be
searched for in the search window
with <A...9>.
The list appearing below shows all
hits containing the character
string. The hit list is updated with
each character that is entered.
Operation
107