®
photoLab
6100 VIS
Operation at RS232
ba75847e06
06/2013
Connect the RS232 interface to the devices as follows:
PC: with a commercially available zero modem cable
Printer: with a commercially available RS232 printer cable
The cables are available in specialized computer shops.
Set up the following interface data at the PC/printer:
Baud rate
Flow control
("handshake")
Parity
Data bits
Stop bits
3.4.3
USB memory device
Using a USB memory device (such as a USB flash drive), you can
update the meter software and method data (section 4.20)
transmit data to the USB memory device (section 4.11 and section 4.12).
USB memory devices are connected to the USB-A interface.
Note
Please follow the instructions on using USB memory devices (see section
4.11.2).
Selectable from 1200, 2400, 4800, 9600, 19200
The baud rate must agree with the baud rate set on
the PC/printer.
none
none
8
1
Commissioning
23