Operation
Execution
166
4.20
Software and methods update
The software and method update is used to continuously update your pho-
tometer.
Note
Only members of the user group, Administrator may carry out any software
and method updates.
The update comprises
the newest firmware (meter software)
new or changed method data
Note
User-defined data (such as settings, user-defined methods or measured
data) are not changed by a software and methods update.
The current software version is available on the Internet under
http://www.WTW.com.
The software can be transmitted to the photometer as follows:
by means of a USB memory device as a temporary storage
(section 4.20.1).
by means of a USB connection between a PC and the photometer
(section 4.20.2).
4.20.1
Update using a USB memory device
Store the new software required for the update on the USB memory and con-
nect it to the photometer.
photoLab
1 Connect the USB memory device
to the PC.
2 Unpack the contents of the down-
loaded exe or zip file with the
entire folder structure in the main
directory (top level) of the USB
memory.
ba75847d06
®
6100 VIS
06/2013