Operation; Switching On Or Off The Photometer - wtw photoLab 6100 VIS Operating Manual

®
photoLab 6100 VIS
Switching on
Starting the
Self test
Self test
ba75847d06 06/2013
4

Operation

4.1

Switching on or off the photometer

Self test
Please make sure no cell is inserted and the cover is
closed. Then press <START/ENTER>
Setup
Login
Enter user name
Administrator
Self test
Please make sure no cell is inserted and the cover is
closed. Then press <START/ENTER>
During the self-test, all cells must be removed and the cell shaft cover closed.
1 Switch the photometer on with
<ON/OFF>.
The display shows
16.04.07 9:52
– the Self test dialog (if the user
management is not active).
or
– the Login dialog
(if the user management is
active).
Info
With activated user management:
16.04.07 9:52
2 Login
Enter user name and password or
register as a guest (see section
4.16.4).
Then the photometer displays the
Self test dialog.
3 Remove all cells and close the cell
16.04.07 9:52
shaft cover.
4 Start the self-test with
<START·ENTER>.
The photometer carries out the
self-test.
Operation
27