Inverting Filters - wtw photoLab 6100 VIS Operating Manual

Operation
128
Note
Alternatively, you can hide measurement datasets that meet the specified fil-
ter criteria with the Selected values: invert selection function (see section
4.11.8).
4.11.8

Inverting filters

With the Selected values: invert selection function you can hide all measure-
ment datasets that correspond to the specified criteria of the filter (see sec-
tion 4.11.7).
Note
You can use this function to select and delete measurement datasets no lon-
ger used.
<HOME>
Concentration,
Absorbance / % Transmission, or
Special / Multi wavelengths
– [Setup]
– Measurement data
memory
– Setup
– Selected values:
invert selection
Measurement data memory
27.03.07 14:00 3.50 mg/l Ni Administrator
27.03.07 14:05 3.64 mg/l Ni Administrator
27.03.07 14:10 3.69 mg/l Ni Administrator
27.03.07 14:15 3.72 mg/l Ni Administrator
27.03.07 14:20 3.72 mg/l Ni Administrator
27.03.07 14:25 3.75 mg/l Ni Administrator
27.03.07 14:30 3.73 mg/l Ni Administrator
27.03.07 14:35 3.80 mg/l Ni Administrator
27.03.07 14:40 3.78 mg/l Ni Administrator
✓
Filter
Memory space usage: 9/
Setup Single value Delete
The Measurement data memory
16.04.07 9:52
list is displayed. All measurement
AutoStore
AutoStore
datasets corresponding to the fil-
AutoStore
AutoStore
ter criteria are hidden.
AutoStore
AutoStore
AutoStore
AutoStore
AutoStore
®
photoLab 6100 VIS
ba75847d06 06/2013