Operation
164
4.17
Reset
You can reset (initialize) the measurement settings or all settings.
Note
The Reset function is available for users of the user group, Administrator
only.
You have the following options of resetting the photometer settings:
Reset configuration
Delivery condition
Lamp counter
<HOME>
[General setup]
– Reset
photoLab
All settings except for the measure-
ment data memory, user-defined
methods and measured blank val-
ues are deleted.
All settings (including measurement
data memory and user-defined
methods) are deleted and the pho-
tometer is reset to the delivery con-
dition.
The counter of the operating hours
of the lamp is reset to zero.
The menu where to select the
reset type (Delivery condition /
Reset configuration) is displayed.
1 Select and confirm the reset type.
The reset is carried out.
ba75847d06
®
6100 VIS
06/2013