Activating Or Deactivating The User Management Function - wtw photoLab 6100 VIS Operating Manual

Operation
Activating the user
management
function
Deactivating the
user management
function
158
To do so, you need administrator rights. If the user management is switched
off, the user name and password do not have to be entered. Each user has
full rights.
4.16.2

Activating or deactivating the User management function

Each user can activate the user management function.
If the function is deactivated, each user has administrator rights.
Only members of the user group, administrator can deactivate the user man-
agement function.
If the function is active, each user has to log in to the photometer. After the
login, the user has certain rights depending on the user group.
<HOME>
[General setup]
– User management
User management
User management not active
Activate user management?
Yes
No
<HOME>
[General setup]
– User management
– [Setup]
– Deactivate user
management
Note
If the user management is deactivated by a user of the Administrator user
group, all user accounts that were set up are lost. The password for the
administrator is reset to "admin".
1 Select and confirm Yes.
16.04.07 9:52
The user management function is
active.
Activating the user management
creates an administrator user
account. The user name is
"Administrator". The preset pass-
word is "admin". Change this
password as soon as possible.
The user management function is
inactive.
Each user has administrator
rights.
®
photoLab 6100 VIS
ba75847d06 06/2013