Settings For Data Transmission - wtw photoLab 6100 VIS Operating Manual

®
photoLab 6100 VIS
Decimal separators
for CSV files
Short and long
version
Baud rate for
RS232 interface
Printer
ba75847d06 06/2013

4.14.2 Settings for data transmission

Settings are possible for the data transmission to a printer or PC.
For the output of CSV files you can select either a comma or a point as the
decimal separator. The setting is made in the following menu:
<HOME> -> General setup -> Data transfer/Printer -> Decimal separator for
csv-Files -> Comma (12,34) or Point (12.34).
When printing measurement datasets, you can select a short or long version
with different information contents. The setting is made in the following menu:
<HOME> -> General setup -> Data transfer/Printer -> Data format (print) ->
Short or Extended.
The baud rate can be set for printers that are operated at the RS232 inter-
face. Adjust the photoLab
ting is made in the following menu:
<HOME> -> General setup -> Data transfer/Printer -> Baudrate for RS232
printer -> 1200 ... 19200.
Here you can set which function is assigned to the <PRINT> key:
 Output to a USB printer
 Output as pdf file
The setting is made in the following menu:
<HOME> -> General setup -> Data transfer/Printer -> Function of PRINT key
-> USB printer or PDF file.
®
6100 VIS to the baud rate of the printer. The set-
Operation
137