Pm Checklist - Taylor-Dunn C0-T50-80 Service And Parts Manual

C0-T50-80

PM CHECKLIST

This PM Check list is
available as a Acrobat
PDF file included on the
Vehicle Documentation
CD provided with the
vehicle.
MC-T50E-02
Preventative Maintenance Schedule for Tiger C0-T50-80
Date: ________________________
Inspected By: ________________________
Serviced By: ________________________
Interval Service
2
Inspect
1
(hours) Required
First 15 hours of
operation
One Every Week
150
(Monthly)
500
(3-Months)
Perform Monthly
service + these
items
1000
(6-Months)
Perform 3-Month
service + these
items
2000
(Yearly)
Perform 6-Month
service + these
items
Notes (1) and (2), Refer to "Maintenance Guidelines for Severe Duty" in the vehicles service manual
Refer to supplemental engine manual for engine specific maintenance such as fluid/filter change intervals and
wearable components
Form PM-0013, Revision A, 11/21/2013
Service/Maintenance Guidelines
Model #: ________________
Serial #: ________________
Unit ID#: ________________
Service
Item Description
Complete
Re-Torque wheel nuts
Inspect all hardware for tightness
Adjust front wheel bearings
Check all tire tread for debris
Inspect/adjust front wheel bearings
Wash and clean battery and terminals
Check battery fluid level
Check tire air pressure
Check tire air pressure
Wash battery compartment
Inspect brake fluid level
Inspect hydraulic fluid level
Inspect gap between rear hub and gear case for debris
Lubricate chassis
Lubricate front axle
Adjust service and park brake
Inspect wheel bearings
Re-torque wheel nuts
Inspect and tighten all power electrical connections
Inspect all hardware for tightness (1
Inspect and tighten all hardware
Tighten all electrical connections
Inspect wiring for cracks, fraying, wear
Inspect steering link rod ends
Inspect steering king pins
Align front end
Change hydraulic fluid and optional filter (power steering)
Change rear axle oil (brake and gear boxes)
Clean and repack front wheel bearings, replace seals
Flush and replace brake fluid
Inspect service brakes for wear
Inspect all suspension bushings
Inspect chassis for damage
Rotate tires
Hour Meter: _______________
st
500 hours then every 1000 hours)
Page 17