Table of Contents
Advertisement
Chapter 5: System Maintenance
Figure 5-21: Removing a Cooling Module
Step 4.
Install the replacement module by aligning it with
the module bay on the PSU module and gently
lowering it into. The fan outlet should be aligned with
the PSU faceplate and that the side with screw holes
should be facing up.
Do this with a precisely vertical motion so that the
cooling module's connector can correctly mate with
the connector in the module bay.
Step 5.
Secure the module by fastening the screws you
previously removed.
5-21
Cooling Module Maintenance
Advertisement
Table of Contents
