Table of Contents
Advertisement
EonStor F16F-R/S4031 Installation and Hardware Reference Manual
Step 4.
Step 5.
2-10
fully inserted. This should be done smoothly and gently.
(See Figure 2-7)
Figure 2-7: Installing a Drive Tray
Close the front bezel. Make sure the front bezel is closed
properly to secure the drive tray within chassis. If the front
bezel is not closed properly, the connection between the hard
drive and system backplane will not be secure.
Figure 2-8: Closing the Front Bezel
Lock the flap into place by turning the rotary bezel lock
until the groove on its face is pointing down (vertical
orientation). (See Figure 2-9)
Drive Tray Installation
Advertisement
Table of Contents
