Taylor C832 Service Manual page 83

All Models (Cont'd.)
PROBLEM
The product is not recognized.
The platen will not auto-level.
The automatic air drain will not
close.
McDonald's Intelligap Grills
PROBABLE CAUSE
The grill is not set in the Auto
Product Recognition mode.
The product is out of specification
(examples: freezer burned,
warped, too thick, or too thin).
Defective motors and cables.
Defective motor interface board.
Loose harness connections.
Defective main display controller.
Faulty solenoid.
Loose or broken wire.
77
REMEDY
Correct the product menu settings.
Use good product that is within
specification.
Check/replace the motors and
cables.
Check/replace motor interface
board.
Check/repair/replace harness
connections.
Check/replace main display
controller.
Repair/replace the solenoid.
Locate and repair or replace the
wire.
Troubleshooting