Taylor C832 Service Manual page 35

i. The screen will display "PREP BREAD IN: 000".
Scroll to the desired selection and press the
key.
j. The screen will display "PREP ALARM: AUTO".
Scroll to the desired selection and press the
key.
k. The screen will display "TOP TEMP OFF."
Pressing the key will set the TOP TEMP at
150F. To adjust that setting, repeat Steps 2 - 4
from the Remove Gap section on page 25.
l. The screen will display "BOTTOM TEMP OFF."
Pressing the key will set the TOP TEMP at
150F. To adjust that setting, repeat Steps 2 - 4
from the Remove Gap section on page 25.
For items with multiple functions, repeat these
steps until all the functions have been entered.
CLAM SELECTION:
If "CLAM" was selected, after the
the screen will display "GAP STAGES: 0."
a. If the new item is a multi-gap product, use the
key to change the gap stage to "1" and
press the key.
b. The screen will display "AM __ PM __". Use the
keys to select the appropriate option
and press the key.
c. The screen will display "REMOVE IN 000." Scroll
to the appropriate time and press the
d. The screen will display "REMOVE ALARM:
AUTO." Scroll to appropriate selection and press
the key.
McDonald's Intelligap Grills
e. The screen will display "REMOVE GAP: 000". If
the new item is a multi-gap product, use the
specification. Press the
f. The screen will display "STAGE1 TIME: 000."
Scroll to the appropriate time and press the
g. The screen will display, "STAGE1 GAP: 000."
Scroll to the appropriate gap setting and press
the
h. The screen will display "MUST REMOVE IN".
Scroll to the appropriate selection and press the
i. The screen will display "PREP BREAD IN". Scroll
to the appropriate selection and press the
key.
j. The screen will display "PREP ALARM: AUTO".
Scroll to the appropriate selection and press the
is pressed,
k. The screen will display "TOP TEMP OFF."
Pressing the
150F. To adjust the setting, repeat Steps 2 - 4
from the Remove Gap section on page 25.
l. The screen will then display "BOTTOM TEMP
OFF." Pressing the
TEMP at 150F. To adjust the setting, repeat
Steps 2 - 4 from the Remove Gap section on
page 25.
For items with multiple functions, repeat these
steps until all the functions have been entered.
key.
m. The screen will display "AUTO SELECTION:
NO". Scroll to the appropriate selection and press
the
29
keys to enter the product gap
key.
key.
key.
key.
key.
key will set the TOP TEMP at
key will set the TOP
key.
Controls and Systems
141015