Taylor C832 Service Manual page 49

"IGNT" - Pressing the
Figure 26
Note: This item only applies to gas grills. It is used
to verify that the grill is getting ignition.
To exit this screen, press the
"LAMP" - Pressing the
Figure 27
To exit this screen, press the
McDonald's Intelligap Grills
key will display:
key.
key will display:
key.
"XFAN" - Pressing the
following.
This item is used to adjust the exhaust fan speed.
To exit this screen, press the
CLAM
Pressing the key will display:
Press the key to raise the platen. Press the
key to lower the platen. This item is used to
verify that the latch switch is operational.
To exit this screen, press the
43
key will display the
Figure 28
key.
Figure 29
key.
Controls and Systems