Danfoss VLT Instruction Manual page 78

6 How to program the adjustable frequency
drive
0-37 Display Text 1
Range:
0 N/A* [0 - 0 N/A]
0-38 Display Text 2
Range:
0 N/A* [0 - 0 N/A]
6
0-39 Display Text 3
Range:
0 N/A* [0 - 0 N/A]
0-70 Set Date and Time
Range:
0 N/A* [0 - 0 N/A]
0-71 Date Format
Option:
[0] * YYYY-MM-DD
[1] * DD-MM-YYYY
[2] MM/DD/YYYY
6-20
Function:
In this parameter, it is possible to write an individual text string for display in the LCP or to be read
via serial communication. If it is to be displayed permanently, select Display Text 1 in par.
Display Line 1.1 Small
0-20 , par.0-21
Display Line 2 Large
par. 0-23 or par. 0-24
LCP to change a character. Use the
highlighted by the cursor, it can be changed. Use the
character. A character can be inserted by placing the cursor between two characters and pressing
▲ ▼
or .
Function:
In this parameter, it is possible to write an individual text string for display in the LCP or to be read
via serial communication. If it is to be displayed permanently, select Display Text 2 in par.
0-20 Display Line 1.1 Small , par.0-21
Display Line 2 Large
par. 0-23 or par. 0-24
LCP to change a character. Use the
highlighted by the cursor, this character can be changed. A character can be inserted by placing the
cursor between two characters and pressing
Function:
In this parameter, it is possible to write an individual text string for display in the LCP or to be read
via serial communication. If it is to be displayed permanently, select Display Text 3 in par.
0-20 Display Line 1.1 Small ,par.0-21
Display Line 2 Large
par. 0-23 or par. 0-24
LCP to change a character. Use the
highlighted by the cursor, this character can be changed. A character can be inserted by placing the
cursor between two characters and pressing
Function:
Sets the date and time of the internal clock. The format to be used is set in par.0-71
and par.0-72 Time Format .
Function:
Sets the date format to be used in the LCP.
MG.11.A9.22 - VLT ® is a registered Danfoss trademark
VLT ® HVAC Drive Instruction Manual
Display Line 1.2 Small
, par. 0-22
Display Line 3 Large
. Use the
◀ ▶
and buttons to move the cursor. When a character is
▲ ▼
or buttons on the LCP to change a
Display Line 1.2 Small , par. 0-22
Display Line 3 Large
. Use the
◀ ▶
and buttons to move the cursor. When a character is
▲ ▼
or .
Display Line 1.2 Small , par. 0-22
Display Line 3 Large
. Use the
◀ ▶
and buttons to move the cursor. When a character is
▲ ▼
or .
Display Line 1.3 Small
,
▲ ▼
or buttons on the
Display Line 1.3 Small ,
▲ ▼
or buttons on the
Display Line 1.3 Small ,
▲ ▼
or buttons on the
Date Format