A2. Manually Installing The Usb Driver - Visonic PowerMaster 360 Installer's Manual

A2. Manually Installing the USB Driver

1. Connect the USB cable to the PowerMaster 360 and to the laptop;
the following message will appear in the bottom right corner of the
screen.
2. If installation is successful, the following message will appear.
The screen below then opens.
Note: ELMO GMAS (COMxx) may appear instead of Gadget
Serial (COMxx) in both this message and in the screen below.
3. If Windows does not recognize the software
during startup, the following message will
appear:
D-305735 PowerMaster 360 Installer's Guide
APPENDIX A. PowerMaster 360 Configurator
63