Visonic PowerMaster 360 Installer's Manual page 59

6. Click the Connect tab, which includes Broadband network settings. Enter the following settings:
IP Address 1/2: First and second IP address of the PowerManage server with which the PowerMaster 360
o
communicates.
APN: Enter the name of the Access Point used for the internet settings of the GSM.
o
Sim Pin Code: Enter the PIN code of the SIM card installed in the GSM module.
o
Panel Sim No: Enter the PowerMaster 360 SIM card telephone number.
o
Wakeup Caller ID: Enter the "Caller ID" (i.e. telephone number) from which the Monitoring Station calls the
o
control panel for initiating the Up/Download process.
GPRS Password / User Name: Enter the Password and Username of the APN used for GPRS communications
o
Local Network Setting DHCP: Select this option to obtain the PowerMaster 360's IP address automatically. To
o
assign the PowerMaster 360 a specific and permanent IP address, deselect this option and type its IP Address,
Subnet Mask and Gateway.
Current PowerLink. Read only fields that display the current PowerLink IP addresses of the PowerMaster 360.
o
7. Click Save All in the top right corner of the screen.
Note: Save All saves all changes made on all of the Configurator tabs.
8. Click the Alerts tab. Here, define up to 4 email addresses and 4 mobile devices to receive forwarded events by e-
mail and SMS from the PowerManage server. Additionally, select the types of event messages which each user is
allowed to receive (Alarms, Alerts, Troubles, Open/Close events).
Notes for installers:
Verify that the PowerManage server is configured to send emails and SMSs.
o
Verify that the Panel event reporting to CMS is defined as ALL.
o
Any of these notifications can be sent to the property owner in addition to the Central Monitoring Station. For
o
detailed instructions, see the PowerMaster 360 Installer and Quick Guide.
D-305735 PowerMaster 360 Installer's Guide
APPENDIX A. PowerMaster 360 Configurator
59