A2. Kp-140/141 Pg2 - Visonic PowerMaster-360R User Manual

Appendices

A2. KP-140/141 PG2

Arming and disarming the system
Step Basic Arming
Select a PARTITION
1
(Partition enabled)
Arm AWAY
Arm HOME
2
Disarm (OFF)
Quick arm AWAY
Quick arm HOME
Enter USER CODE or
present Proximity TAG.
3
INSTANT
4
LATCHKEY
Initiating Alarms
Alarm Actions
Emergency
alarm
Fire alarm
Panic alarm
54
or
( 2 sec.)
( 2 sec.)
[USER CODE] or
TAG]
[DURESS CODE] (2580 by default)
(After arming HOME/ AWAY)
(After arming AWAY)
Response
( 2 sec.)
See KP-140
PG2 User's
Guide, "Panel
Response to
Keypad
( 2 sec.)
Commands"
section 3.5
( 2 sec.)
User Actions
or
[present
Other Functions
Function
AUX Function
(see Note)
STATUS
indication
Note: For the AUX button configuration, see the
KP-140 PG2 Installation Instructions.
D-307084 PowerMaster-360R User's Guide
Keypad & Panel Response
The selected button lights.
The selected button starts blinking
and prompts you to enter your
"User Code" or present your Tag.
See step 3.
The keypad's LED blinks red once
to indicate transmission of the
arming command to the control
panel. The control
response is then indicated on the
keypad by the LED and the buzzer
– see KP-140 PG2 User's Guide,
"Panel Response to Keypad
Commands" section 3.5
The keypad's LED blinks red once
to indicate transmission of the
command to the control panel. The
control panel's response is then
indicated on the keypad by the
LED and the buzzer – see KP-140
PG2 User's Guide,
Response to
Commands" section 3.5.
User Actions Response
See section
3.5 of KP-140
PG2 User's
Guide.
See section
3.6 of KP-140
PG2 User's
Guide.
panel's
"Panel
Keypad