Normal Operating Procedure - Thermo Scientific Sorvall RC6 Plus Instruction Manual

Temperature (TEMP)
4 degrees centigrade
The display turns to ready-to-enter
state.
The cursor is blinking at the single
digit position.
The temperature setting is "4 degrees
centigrade".
-20 degrees centigrade to 40 degrees cen-
tigrade: in increments of 1 degree centi-
grade

Normal Operating Procedure

This section describes the procedure for normal operation.
Note Before following the procedure, read the rotor instruction manual carefully and make sure
that you have selected the appropriate type of tube for the sample, and that the amount of sample
in the tubes is correct.
Thermo Scientific
Acceleration Rate (ACCEL)
9
The display turns to ready-to-enter state.
The acceleration rate setting is "9".
1 to 9
4
OPERATION
Normal Operating Procedure
Deceleration Rate (DECEL)
7
The display turns to ready-to-enter state.
Enter "0" for selecting free coast.
The deceleration rate setting is "7".
1 to 9 and 0 for free coast
Sorvall RC6 Plus 4-7