Thermo Scientific Sorvall RC6 Plus Instruction Manual page 41

Step
4
5
Thermo Scientific
Key operation
When other conditions are saved, selecr
the desired memory No. (.g.: at MEMORY
NO.2)
And enter run conditions as follows.
e.g.: SPEED: 20,000 rpm
TIME: HOLD
TEMP: 4 degrees centigrade
ACCEL: 9
DECEL: 7
ROTOR No.: 25 (F20/MICRO)
After saving run conditions, press the ESC
key twice.
Screen display and notices
The run conditions are saved at MEMORY No. 2.
• The screen turns to RCF and g.sec values entry screen by
pressing the cursor key.
• The PROGRAM field appears by the first press of the ESC
key.
• The FUNCTION field appears by the second press of the ESC
key.
4
OPERATION
Saving and Changing Run Conditions
Sorvall RC6 Plus 4-11