Controls, Displays & Indicators; Power Switch - Thermo Scientific Sorvall RC6 Plus Instruction Manual

No Name
11 Ten-key
numerical pad

POWER Switch

The POWER switch is located in the upper right-hand corner of the front cabinet panel. The switch is
an ON/OFF toggle switch, when set to ON applies electric power to the centrifuge.
" I " : ON
" O " :OFF
Do not position the centrifuge so that the movement of the POWER switch may become difficult.
POWER Switch
Figure 3-4. POWER switch
Thermo Scientific
Key Function (refer to Figure 3-3)
Used to set run conditions with numeric values.
At time setting : switches between hours and minutes.
Used to clear typing errors and alarm messages.
(1) By pressing the CE key, the entered value on the line where the cursor stays
(2) By pressing the CE key, displayed alarm message is cleared. If two or more
Used to fix the entered value.
CAUTION Always keep the liquid crystal panel in a visible position while the POWER
switch is turned on so that you can check the current operating state.
At temperature setting : Used to enter a minus sign.
At ω 2
T value setting : switches between integer and mantissa.
At run time setting: used to set continuous operation.
is cleared and the cursor returns to the previous position.
alarm messages are displayed at a time, clear them one by one. (Refer to
Corrective Actions for details.)
3
CONTROLS, DISPLAYS & INDICATORS
POWER Switch
RC 6 Plus 3-5