Thermo Scientific Sorvall RC6 Plus Instruction Manual page 53

Thermo Scientific
Changing RUN SCREEN
1 = NORMAL RUN SCREEN is displayed.
2 = ZOOM: The display automatically turns to ZOOM screen when 20
seconds have passed after reaching the set speed. The ZOOM screen
returns to the RUN SCREEN by pressing any key on the panel or when
the rotor starts deceleration.
Changing Date and Time
This feature is used when adjusting the incorporated time clock to the
current date and time correctly.
Set the correct date and time for RTC Operation.
Enter the desired date and time using the cursor keys and the ten-key
numerical pad, then press the ENTER key.
Screen Contrast
Use cursor keys to adjust the contrast.
Enter the desired date and time using the cursor keys and the
ten-key numerical pad, then press the ENTER key.
Note Press the ESC key return to the RUN
SCREEN.The cursor disappears from the screen after
the keyboard is idle for more than 30 seconds. Press a
cursor key to show the cursor on the screen.
Precool
The temperature in the chamber is controlled at about 15 degrees
centigrade if the door is closed and Precool is selected.
(The temperature in the chamber may not hold at 15 degrees centigrade if
the ambient temperature or the temperature of the evaporator is 15
degrees centigrade or less.)
Melody
You can select a desired melody from one tune, a beep, or beep off
(silence) with the numeric key. Press the ENTER key after selection.
4
OPERATION
Features on Menu Screen
Sorvall RC6 Plus 4-23