Thermo Scientific Sorvall RC6 Plus Instruction Manual page 48

4
OPERATION
Displaying and Setting RCF
Step
1
2
Note
1. Press ESC key to clear the RCF screen.
2. The RCF operation is canceled by changing the set speed or changing the operation mode to
the programmed operation mode.
4-18 Sorvall RC6 Plus
Key operation Screen display and notices
Move the cursor to
PROG and press the
ENTER key.
The FUNCTION indicator turns to the RCF display.
RCF (Upper line).
(Lower line) Set RCF
Enter the desired RCF
The RPM is computed from the set RCF and selected rotor is
with the ten-key
displayed.
numeric pad and press
the ENTER key.
Set RCF
Displays the actual RCF computed for the motor speed and selected
rotor.
Displays the set RCF computed for the motor speed and selected rotor.
Thermo Scientific