Chapter 7 Handling And Control; Control Panel Keys, Displays & Indicators - Thermo Scientific 3962 Operating Manual

Thermo Scientific
Handling and Control
Control Panel Keys, Displays & Indicators
Figure 7-1 Control Panel
Silence - Press to mute the audible alarm.
Alarm Indicator - Light pulses on/off during an alarm condition in the unit.
Mode Select Switch - Used to select Run, Setpoints, Calibration and System
Configuration Modes.
Message Center - Displays system status.
Mode Select Indicators -
Run: Run Menu

Set: Set Points Menu

Cal: Calibrate Menu

Config: Configuration Menu

Up and Down Arrows - Increases/decreases or toggles the parameter values that have
been selected in the SET, CAL, and CONFIG Modes.
Enter - Press Enter key to save to memory all changed values.
Heat Indicator - Lights when power is applied to the heaters.
Temp Display - Displays temperature continuously
Scroll for Parameters Arrows - Steps the operator through the parameters of SET, CAL
and CONFIG Modes. The right arrow goes to the next parameter, the left arrow returns to
the previous.
Handling and Control |
Chapter 7
Model 3962 | 7-1