Instructions For Use; Controls And Indicators - Thermo Scientific Sorvall T3 User Manual

Instructions for Use

Chapter 4

Controls and Indicators

All the controls are located on the front panel. The front panel is an intuitive interface: no previous
operational knowledge is necessary; every parameter can be set by pressing the cursor key (or rotating the
knob) from the minimum to the maximum and viceversa. All parameters can be accessed and changed both
during operation and while the machine is at rest.
1 1a 2 2a
3 3a 4 4a
Buttons
1 - 4 Program Keys
5 Pre Cooling
6 Speed/RCF Toggle
7 Time/Radius Toggle
8 Acceleration rate set
9 Deceleration rate set
10 Stop Run
11 Pulse Run
12 Start Run
13 Temperature set (R only)
Display Screens
15 Display: speed/RCF
16 Display: time/raduis
17 Display: accel./decel. rates/temp. (R mod.)
Thermo Fisher Scientific
15 18
6 19
16 20 8a
7 21
LED Lights
1a Program 1 Indicator
2a Program 2 Indicator
3a Program 3 Indicator
4a Program 4 Indicator
5a Program Precooling Indicator
8a Acceleration Indicator
9a Deceleration Indicator
14 Lid Opening allowed Indicator
18 Speed Indicator
19 RCF Indicator
20 Time Indicator
21 Radius Input Indicator
9a 17
8 9 13 5a
11 14
5 12 10
T3/G3 4-1