Eng] 5.3. [Dksf 48.4 Iu] Initial Configuration Of A Humidity Sensor - NetPing 8/PWR-220 v3/SMS User Manual

[ENG] 5.3. [DKSF 48.4 IU] Initial Configuration of a Humidity Sensor

At the page « HUMIDITY » of a device web interface readings of a humidity sensor are displayed, which is connected to a device. Only one humidity
sensor of a 1-Wire model line can be plugged to a device.
To plug a sensor in, indicate its unique number in the field «
Unique Id of 1W Sensor – is a unique number of a 1-Wire humidity sensor, plugged into a 1W socket. The address consists of 4 four-digit hexadecimal
numbers. On default : empty line
You can know a unique Id of a 1-Wire sensor in two ways:
1. A unique Id of a 1-Wire humidity sensor is indicated on the sticker at the sensor.
2. You can know a unique Id of a 1-Wire humidity sensor from the section
Humidity Sensor? »
Copyright © NetPing east Co., Ltd E-mail:
Unique Id of 1W Sensor»
support@netpingdevice.com Phone:+886-2-23121582
.
«5.2. [DKSF 48.4 IU] How to Determine a Unique Id of a 1-Wire