Table of Contents
Advertisement
[ENG] 14.7. [DKSF 48.4 IU] IR Command Transceiver Management
An interface of URL-encoded commands in a device can be used to integrate with web applications without using an SNMP protocol. It is possible to
control an IR command transceiver t
Sending an IR Command
http://192.168.0.100/ir.cgi?play=N
where:
N is a number of a command.
–
Returned Values
ir_result('ok')
ir_result('error')
An error is returned only if a request format is
response is formulated.
Copyright © NetPing east Co., Ltd E-mail:
hrough the interface of URL-encoded commands.
incorrect
or a command number is
support@netpingdevice.com
Phone:+886-2-23121582
wrong
. Errors of the module IRC-TRv2 are not checked when a
Hide quick links:
Advertisement
Table of Contents
