Eng] 3.7. [Dksf 48.4 Iu] It Is Necessary To Send Snmp Trap Notifications. How To Configure This - NetPing 8/PWR-220 v3/SMS User Manual

Table of Contents

Advertisement

[ENG] 3.7. [DKSF 48.4 IU] It Is Necessary to Send SNMP Trap Notifications. How to Configure This?

_D_E_SNMP_Trap
IP addresses for sending SNMP TRAP notifications are configured at the page «
Setup
» of a device web
interface. This group of settings allows configuring up to two addresses, where SNMP TRAP notifications
will be sent via an SNMP protocol.
Events for these notifications to be sent are specified at other pages of a device web interface.
In the section «
SNMP TRAP
» it is possible to configure the following:
SNMP Trap Destination #1 - is a field for configuring or changing the first address, where SNMP TRAP notifications will be sent. It is
possible to specify an IP address or a domain name. An empty field means SNMP TRAP notifications will not be sent. On default: addre
ss is not specified
SNMP Trap Destination #2  – is a field for configuring or changing the second address, where SNMP TRAP notifications will be sent. It
is possible to indicate an IP address or a domain name. An empty field means SNMP TRAP notifications will not be sent. On default: аd
dress is not specified
After configuring all necessary settings, click the button «
Apply changes
».
Copyright © NetPing east Co., Ltd E-mail:
support@netpingdevice.com
Phone:+886-2-23121582

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents