Interface - NetPing 8/PWR-220 v3/SMS User Manual

[ENG] 5.4. [DKSF 48.4 IU] Browsing Readings and Configuring Parameters of a Humidity Sensor in a Web

Interface

To browse readings and a configuration of humidity sensor parameters, there is a need to go to the page «
where:
Sensor status – determines a sensor status in a current moment of time. Possible variants are: «
», « above a safe range »;
Relative Humidity – shows readings of a sensor, which measures a relative humidity in %;
Temperature – shows readings of a temperature sensor, embedded into a humidity sensor, in
Dew Point – is a dew point temperature, which is calculated from readings of a humidity sensor and a temperature, in
Top Margin of Humidity Safe Range – is a humidity value, exceeding which a sensor switches to a status «
percentage point. On default : 85
Bottom Margin of Humidity Safe Range – is a humidity value dropping below which a sensor switches to a status «
1 percentage point. On default : 5
Copyright © NetPing east Co., Ltd E-mail: support@netpingdevice.com Phone:+886-2-23121582
HUMIDITY » of a device web interface:
sensor failed », « within a safe range
°C;
°C;
above a safe range ». Hysteresis is
below a safe range
», « below a safe range
± 1
». Hysteresis is ±