Table of Contents
Advertisement
, » «switched on manually , » «watchdog management , » «schedule management , » «schedule and watchdog management , » «logic management . »
PWR: relay N "XXXX" is switched to the mode "YYYY" through SNMP – is recorded into the log file when a relay management mode is switched
using an SNMP protocol. N – is a number of a power management channel. XXXX – is a description of a power management channel, specified by a
user at the page of a web interface. YYYY – is a name of a relay management mode. The next modes are possible: «switched off manually», «switched
on manually», «watchdog management», «schedule management», «schedule and watchdog management», «logic management».
PWR: relay N "XXXX"
is switched to the mode
URL-encoded commands (HTTP API). N – is a number of a power management channel. XXXX is a description of a power management channel,
specified by a user at the page of a web interface. YYYY – is a name of a relay management mode. The next modes are possible: «switched off
manually», «switched on manually», «watchdog management», «schedule management», «schedule and watchdog management», «logic management».
PWR: relay N "XXXX" is switched to the mode "YYYY" by a command via SMS – is recorded into the log file when switching a relay management
mode using SMS commands. N – is a number of a power management channel. XXXX – is a description of a power management channel, specified by
a user at the page of a web interface. YYYY – is a name of a relay management mode. The next modes are possible: «switched off manually», «switched
on manually», «watchdog management», «schedule management», «schedule and watchdog management», «logic management».
Events
from Power Supply Inputs
PWR: sockets N are switched to the input X – is recorded into the log file when an input for a group of sockets is switched directly. N – is a group of
sockets with the next possible values: «1-4» and «5-8». X – is a number of an input, possible values are «1» and «2».
PWR:
an input X without backup is set to feed
sockets via a device web interface as well as in the moment of disabling a parameter
values are possible: «1-4» and «5-8». X – is an input number, its possible values are: «1» and «2».
PWR:
an input X without the backup is set
parameter «Switch to the backup input
input number, its possible values are
PWR: a
main input X is set to feed
parameter
«Switch to the backup input» in a web interface N – is a group of sockets. The next values are possible: «1-4» and «5-8». X – is an input
number, its possible values are: «1» and «2».
PWR: a main input X is set to feed N sockets using an SMS command, backup without auto return – is recorded into the log file in the moment of
setting the parameter «Switch to a backup input» using an SMS command. N – is a group of sockets. The next values are possible: «1-4» and «5-8». X –
is an input number, its possible values are: «1» and «2».
PWR: a main input X is set to feed N sockets via a web interface, backup with an auto return – is recorded into the log file in the moment of setting the
parameter «Autoreturn to a main input» in a web interface. N – is a group of sockets. The next values are possible: «1-4» and «5-8». X – is an input
number, its possible values are: «1» and «2».
PWR: a main input X is set to feed
the parameter «Autoreturn to a main input» using an SMS command. N – is a group of sockets. The next values are possible: «1-4» and «5-8». X – is an
input number, its possible values are: «1» and «2».
PWR: a command to return N sockets to a main input (X) is received via a web interface – is recorded into the log file in the moment of a manual return
to a main input in a device web interface. N – is a group of sockets. The next values are possible: «1-4» and «5-8». X – are input numbers, possible
values are: «1->2» and «2->1».
PWR: a command to return N sockets to a main input (X) is received using an SMS command – is recorded into the log file in the moment of a manual
return to a main input using an
values are: «1->2» and «2->1».
PWR: a command to return N sockets to a main input (X) is received by running cgi
a main input by
URL-encoded commands (HTTP API) N – is a group of sockets, the next values are possible: «1-4» and «5-8». X – are input numbers,
possible values are: «1->2» and «2->1».
PWR: voltage appeared at the input X – is recorded into the log file when a voltage appeared at the input X of a device. X – is an input number,
possible values are: «1» and «2».
PWR: voltage disappeared at the input X – is recorded into the log file when a voltage disappeared at the input X of a device. X – is an input number,
possible values are: «1» and «2».
Events from the Module for Sending E-mail Notifications
sendmail: YYYY received in response to XXXX – is recorded into the log file if a server returns «incorrect» response code. XXXX – is a service
information: an authentication method or a message recipient. YYYY – is an error notification.
sendmail: email discarded – is recorded into the log file if it is impossible to send e-mail notification to an SMTP server.
Copyright © NetPing east Co., Ltd E-mail:
"YYYY" by running
N sockets via a web interface
to feed N sockets using an SMS command
» using an SMS command
. N – is a group of sockets. The next values are possible: «1-4» and «5-8». X –
: «1» and «2».
N sockets via a web interface, backup without auto return
.
N sockets using an SMS command, backup with auto return
SMS command
. N – is a group of sockets, the next values are possible: «1-4» and «5-8». X – are input numbers, possible
.
support@netpingdevice.com
cgi – is recorded into the log file when
– is recorded into the log file when installing the main input for a group of
«Switch to the backup input»
– is recorded into the log file in the moment of disabling the
– is recorded into the log file in the moment of setting the
– is recorded into the log file in the moment of setting
– is recorded into the log file in the moment of a manual return to
Phone:+886-2-23121582
a relay management mode is switched
. N – is a group of sockets. The next
using
is an
Hide quick links:
Advertisement
Table of Contents
